Easy to use – FPT-600 is supplied as a concentrated liquid, it must be diluted with water to be effective.
Using pressure washer
– insert the mixing tube directly into container of FPT-600.
Dilute 1 part FPT-600 to 15 parts water and apply directly to greasy areas, allowing the area to remain wet as long as possible. Wash excess solution into the drainage system where FPT-600 will continue to degrease the pipes and start to bioremediate the FOG contamination.
Manual sprayer and brush
– pre mix 1 part FPT-600 to 15 parts water. Spray the affected area, leave for a couple of minutes then agitate and aerate the area with a stiff brush or broom. Allow the area to remain wet as long as possible.
